Frame Motor

Frame Motor
File:Frame motor default TP.png
Name	Frame Motor
Type	Machine
Physics	No
Transparency	No
Luminance	No
Blast Resistance	?
Tool	File:Grid Wood Pickaxe.pngFile:Grid Screwdriver.png
Stackable	Yes (64)
Data Value	150:7
Mod Included	RedPower2

The Frame Motor is a block that can move Support Frames. It needs Blutricity and Redstone power to work, by the Blutricity (needs to be connected to the blank face of the motor) powering the motor, and Redstone power 'activating' it.

When powered, this motor will try to move any block on its "top" side in the direction indicated by the arrow. If the block connected to the side is a support frame, it will try to move the whole frame and connected blocks. Motors cannot move unbreakable blocks like Bedrock or Personal Safes

There are 2 blue points and a red point on 2 faces. When the motor has Blutricity, the blue points became lighter, and when it works, the red point is lighter too.

You can change the direction that the Frame Motor will move the frames by using a Screwdriver or Sonic Screwdriver.

The Frame Motor requires 60V to function.

Movement Limit

The Frame Motor can, by default, move a maximum of 1,000 linked blocks. This block moving limit includes wires, machines, tubes, etc but NOT covers/panels inserted into/applied to Support Frames - this is an important distinction for large builds.

Adding motors does NOT increase the blocks able to be moved.

To modify the max block limit, change the "linksize" value in the redstone configuration file: 

• "AppData\Roaming\.techniclauncher\tekkit\redpower\redpower.cfg"
• .

..
settings{
 .
 ..
   machine{
      frame{
         .
         ..
         linksize = 1000

Recipe